Ferrari tuningbespoke
Engine mapping, chassis and braking tuned case by case for your Ferrari, 700 m from the Paul Ricard circuit.
- Workshop in Signes (83)
- 700 m from the Paul Ricard circuit
- Dedicated engine engineer
- BMW M France partner
Tuningdesigned for your Ferrari
Bernis Factory tunes Ferraris from its Signes workshop, a few hundred metres from the Paul Ricard circuit. Every job starts from the car and from how its owner uses it.
- Principle
Bespoke mapping
A Ferrari's engine and gearbox mapping is tuned case by case by our engine engineer. We never load a generic file: each table is adjusted to the engine, the transmission and the intended use.
- Principle
Chassis and braking
Tuning a Ferrari is not just about the engine. Chassis behaviour, grip and high-performance braking are worked on to stay coherent with the car's power and use.
- Principle
Road and track
A Ferrari built for the road does not aim for the same balance as a car meant for track days. The real use defined at the start guides all the settings.
Standards
worthy of Ferrari
A workshop700 m from the Paul Ricard
Our workshop is located at 26 Allée de Dublin in Signes, 700 metres from the Paul Ricard circuit. This closeness lets us support your Ferrari before, during and after a track day at Le Castelet.
Recognisedexpertise
Bernis Factory is an official BMW M France partner for track support and recommended by ORECA. This high-end sports car standard also guides our work on Ferrari.
Ferrari tuning in Signes and around the Paul Ricard
Bernis Factory is based in Signes, in the Var, at the heart of an environment focused on high-end sports cars. Our workshop brings together three complementary trades: maintenance, preparation and restoration.
For a Ferrari, this approach means full support, from the initial electronic diagnostic through to engine, chassis and braking settings. Every step aims for behaviour faithful to the way you actually use your car.
The immediate closeness to the Paul Ricard circuit at Le Castelet shapes our daily business. It places us as close as possible to Ferrari owners in the region and to enthusiasts passing through.
Go further with Bernis Factory
Tune your Ferrari with a specialist workshop
Tell us about your Ferrari and how you use it, road, track or both. Together we will work out the tuning best suited to your car.
Frequently asked questions about Ferrari tuning
- Which Ferrari models do you prepare?
- Our workshop works on high-end Ferrari sports cars, in a bespoke approach. Each preparation depends on the model, its condition and how you use it. The simplest step is to tell us about your car so we can study the project together.
- Is your Ferrari tuning suitable for track use?
- Yes. Our workshop is 700 metres from the Paul Ricard circuit and we support owners before, during and after a track day. We are an official BMW M France partner for track support and recommended by ORECA.
- Do you use a generic map on Ferraris?
- No. Our engine engineer maps the engine and gearbox case by case. We never reuse a ready-made setting that would ignore your Ferrari and your real use.
- How much does Ferrari tuning cost?
- Every Ferrari preparation is bespoke and depends on the model, its condition and your goals. For an estimate suited to your car, the simplest step is to contact us directly.
- Where is your Ferrari tuning workshop located?
- Our Bernis Factory workshop is at 26 Allée de Dublin in Signes, in the Var, 700 metres from the Paul Ricard circuit at Le Castelet. We welcome Ferrari owners from the region and visitors passing through.
Why entrust your Ferrari tuning to a specialist workshop
Ferrari tuning is not just about chasing a few extra horsepower. At Bernis Factory, it is part of a global approach that ties together the engine, the chassis and the braking, so the car stays coherent and enjoyable to drive. Our engine engineer maps each engine individually, which lets us adapt the character of the Ferrari to its owner without applying a generic setting that would ignore the car in front of him.
This bespoke logic extends naturally to the track. Our workshop is 700 metres from the Paul Ricard circuit at Le Castelet, and we are an official BMW M France partner for track support, on top of being recommended by ORECA. Preparing a Ferrari for track day use, checking the car before a session or stepping in on the day is part of our daily workshop life, alongside the maintenance and restoration of high-end sports cars.
A project,
a call.
Tell us about your car and how you use it. We'll figure out the right service together, maintenance, engine tuning, chassis, restoration.
83870 Signes
Across from the Paul Ricard circuit
Monday, Friday · 9:30-18:00
By appointment only